AM-10

Crimping die set for selection, see them in the following.

The machine is driven by dual-action normal cylinder, which has advantages  of high efficiency and quality in crimping force and speed. The machine is fit for crimping many kinds of terminals. The die sets are interchangeable with our manual crimping tools. So we can provide you all kinds of die sets for  crimping.
Accessories: one die set, one foot air valve, two air pipes.

(1) Put the terminal in relevant tool mouth firstly
(2) Then put the stripped insulated conductor into the terminal, push the foot air valve, loose it after crimping well.
(3) Cut off gas supply. Dismount the fix bolts on the clamp with the L spanner.
(4)Replace a desired clamp and screw down the bolt again.

The traditional fixed mould is replaced by the hexagonal crimping mould, which may perform flexible crimp connection to tubular insulated
terminals.
Since the hexagon can be adjusted steplessly, the crimping specification can be set freely within 0.08-6mm². (As Step 2)
After crimping, the terminals look beautiful in hexagon without any flash edge.

Accessories: one foot air valve, two air pipes.

The machine is driven by dual-action normal cylinder, which has advantages  of high efficiency and quality in crimping force and speed. The machine  is fit for crimping insulated and non-insulated cable end-sleeves.

The traditional fixed mould is replaced by the  square crimping mould, which may perform flexible crimp connection to tubular insulated  terminals.
Since the square can be adjusted steplessly,  the crimping specification can be set freely  within 0.08-6mm².
After crimping, the terminals look beautiful in  hexagon without any flash edge.

The machine is driven by dual-action normal cylinder, which has advantages of high efficiency and quality in crimping force and speed. The machine  is fit for crimping insulated and non-insulated cable end-sleeves.
Accessories: one foot air valve, two air pipes.

DIE SETS FOR SELECTION